Finding Exact Center for Turning

Using a center gage to find center.

Using a center gage to find center.

When you don’t have much extra material to turn you need to find the exact center of the workpiece. In this case I have only about 1/16″ of waste all around on the small side of the oval. This is also compounded by the piece being oval.

The solution is simple. Use the center gage of a combination square set and mark the layout lines from all four sides of the oval. The exact center is the center of a box formed by these lines.

As always, thanks for stopping by and feel free to leave a comment.

About these ads

About R & B ENTERPRISES

Professional furniture maker and restorer. Dealer and collector of vintage and antique woodworking tools.
This entry was posted in Measuring & Layout and tagged , , . Bookmark the permalink.

One Response to Finding Exact Center for Turning

  1. Marilyn says:

    Finally .. a use for this thing. I’ve been using it as a saddle square. Thanks for sharin’

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s